Optional Features

File Drawer
The File Drawer is made of .080 diamond plate aluminum, with file rails for either letter or legal size hanging folders. The drawer can be most any size, as long as it is a minimum of 10" tall. Typically they are 13" to 24" wide and 14" to 23" long. The prices of these sizes are from $425 to $515. This includes a rubber mat on the floor, and a paddle slam latch. If you need to have the drawer lockable, add $20 for a locking paddle slam latch. The drawer slides on 300# capacity full extension slides. All screening necessary to keep items from rolling into the slides is included in the price.

Tool Drawer
The Tool Drawer is made of .080 diamond plate aluminum, typically with a locking slide, or under certain requirements, with either a spring loaded slam latch or a paddle slam latch. The drawer can be almost any size. Typical sizes range from, 10" to 48" wide and 10" to 60" long. The pricing is $315 to $850. This includes a rubber mat on the floor. If the drawer has a paddle slam latch, add $85, or $100 for a locking paddle slam latch. The drawer slides are 300# capacity full extension slides. All screening necessary to keep items from rolling into the slides is included in the price.

Weapons Drawer
The Weapons Drawer is made of .080 diamond plate aluminum, typically with a locking paddle slam latch, sometimes two. The typical size is about 45"w x 15"d x 11"t, w/ one paddle latch. The price is approximately $540. This includes a rubber mat on the floor. The drawer slides are 300# capacity full extension slides. All screening necessary to keep items from rolling into the slides is included in the price.

Easel Board
The Easel Board is a collapsible assembly, that, when unfolded and hung onto the corner of the Extendo Bed has two magnetic dry-erase surfaces that are approximately 22"t x 30"w. This assembly must be stored during transport - they take up approximately 23" x 33" x 2 1/2" of space, each. There are a variety of ways to add storage areas on the Extendo Bed, for one or two of the assemblies. Please call if you have any questions.
.

Command Board & Pull-out Table & Fold-down Table
This photo feaures a number of our "Command" options. There are drawers, a Fold-down Table, a pull-out table, and a Command / Map Board. The tables and command board are typically dry-erase polypropylene, but can be dry-erase porcelain coated sheet metal (magnetic). We can also build dry-erase boards that are mounted on the side of the structure and fold-up at an angle. We can build any of these items just about any size. The Command Boards range in price from $322 for a smaller standard dry-erase, to $705 for a large reversible magnetic board. The fold-down tables range from $322 to $483 for typical sizes, and the pull out table is typically $380. Sizes and material options can affect pricing. We work with our customers to give them the features they need and want, so long as it fits the Extendo Bed and the vehicle.

Pencil Tray & Tool Drawer
The Pencil Tray is a small aluminum tray sized for pencils, white board markers, erasers, and other small miscellaneous items. Also shown in the photos is a couple of drawers, and a command board.

Slide out Mounting Wall
This sliding wall is attached to 300# capacity slides, with a plywood surface for mounting SCBA's, Fire Extinguishers, etc. It is especially useful for sliding out the SCBA or Air Pack, backing up to it, hooking in, and walking away. No more grabbing the pack and throwing it over and around your back to get it on. It can be mounted on either side, or even out the end, if that works best for you.

Stokes / Backboard Slot & Plywood Mounting Wall
We call the space for sliding in backboards and or Stokes or Litter baskets a "Slot" - backboard or stokes. The sides of the slot are typically either steel mesh, or mesh and plywood (as shown here), or both plywood. This is also a very nice picture of the Plywood Mounting Wall.

Radio Panel & File Drawer & Fold-down Table
The Radio panel is aluminum and is removable and can be cut to fit whatever radio equipment you may have. The side panel (outside) is also removable for better access for setting your equipment up. All these features are very neatly capped off when the dry-erase fold-down table is closed..

Bomb / Day Boxes
This bomb or day box is built per the ATF specifications for a "Type 3 magazine", with the addition of the Rhino Coating on the plywood which is wrapped all around the inside. There are two compartments with a center divider, with one overlapping lid. It does require that you supply your own padlock. The box is mounted to 300# capacity slides. It is nearly 100# by itself. It can also be padlocked closed to the Extendo Bed frame structure for additional security.

The following bomb or day boxes aren't in complete compliance with the current ATF Specifications regarding a "Type 3" magazine. The "door" is to overlap the "door opening" by at least one inch; and these fall just shy of that requirement. It is a very convenient setup, where each compartment is totally separate from the other. A "variance" can be obtained from the ATF for this box design.

Scale Racks
These Scale Racks are built to maximize the number of scales stored in the least amount of space. There are 16 scales mounted in this setup - 8 accessible from each side. We build these racks to fit the various scales that will be used by the vehicle enforcement agency.

Evidence Enclosure w/ keyed paddle latch
The Evidence Box is an aluminum diamond plate enclosure. The sides are of .063 thickness, and the door is .100 . This drawing shows the keyed paddle slam latch. It can also be locked using your own paddlock with a hasps latch. (PS: we haven't received a real good photo showing this feature, yet).

Bottle Racks
This style of bottle rack we build, offers the ease and convience of easy access. The bottles are very easily pulled out, instead of lifted up and out of a normal containment tube. We do also build the tube style when space dictates it. These racks are build of sheet metal, and formed to fit the specific bottles to be stored in them, then sprayed with Rhino Lining. There is some type of containment to keep the bottles in - here we have fold-down gates.

Cascade Bottle Rack
This cascade bottle rack is very heavy duty, obviously to keep these monstor heavy bottles in place. Typically the upper decks are removable for easier mounting and replacement of the bottles.

Fold-down Gates
The fold down gates is typically built with steel mesh in an steel angle frame. It is hinged with a piano hinge, and latched with barrel bolt latches or spring slam latches. They are typically 6" high.

Computer fold-up table
This fold-up Computer table is not permanently attached. It will hook onto the angle rail, anywhere that will not cause any interference. It stows flat as shown in the photo on the right side.

Power lift Map Board in Drawer
This setup shows a very clean way to store this Power lift, Map / Command Board, with necessary accessories like; pencils, erasers, markers, and a bunch of paperwork or other supplies. It stows flat, and when you pull the drawer out, you lift up on the tab, and the gas springs do the rest. It also features a clear polycarbonate cover over the dry-erase white board, or in the case of this unit - the Accountability Board. Kent Fire was the first to request this kind of setup, and we have done several since, because of the clean look and the functional use. The bottom photo shows it just after we built it, before it was put in use by another department.

Energy Chain
Here is another optional product that we have been offering since early 2004. It works
very well if you are running any electrical cords from your vehicle to the Extendo Bed.
Prices range from $65 for the 40/42" to $180 for the 90".

Click Here for more pictures and some simple installation steps for the Energy Chain

Weather Awning
Here is a look at the Weather Awning we offer. It comes in two sizes - (pricing is $562 & $593)
one that fits smaller Extendo Bed setups, up to 6', and a larger one that fits setups 7' plus.

Click Here for more pictures and some simple installation steps

Power Drive (Linear Actuators)
This is a Solid Model Rendering of an Extendo Bed with the Linear Actuators installed, with the appropriate bracketry for the installation. The electrical requirements are not show except for the toggle switch and switch plate. **Following the picture are some links to an "Edrawing" of the assembly**.

Click Here for More Information

.EXE (excutable)

.HTML (requires viewer to be on your computer)